Eastman

LEAKPROOF PERFORMANCE WITH TEFLON SEATS WORKING PRESSURE: 125 PSI WORKING TEMP: 40° TO 140°F BRASS CONSTRUCTION WITH CHROME PLATED FINISH 24

KIT INCLUDES: (1) 6 FT. STAINLESS STEEL DISHWASHER SUPPLY LINE, (1) 6 FT. 3-PRONG ANGLED POWER CORD, (1) 3/8" MIP ELBOW, (1) 3/8" FHT ELBOW, (3) WI...

DIMENSIONS: 10-1/4" X 4" X 9-1/2" ACOMMODATES UP TO 1" DRYWALL

STEAM WORKING PRESSURE: 150 PSIG WORKING PRESSURE: 600 WOG TEFLON SEAL 25

HEAVY DUTY BRONZE AND FORGED LEAD-FREE BRASS CONSTRUCTIONVERSATILE UNION TANK CONNECTIONS150 PSI PRESSURE RELIEF VALVE INCLUDED600 PSI WOG 

DESIGNED TO FIT MOST STANDARD SIZED BATHTUBS  LIFT-N-LOCK STOPPER  

PLASTIC BODY AND WATERWAYS  CERAMIC DISC CARTRIDGE 12

304-BRAIDED STAINLESS STEEL EXTERIOR WITH RUBBER WASHERS WORKING PRESSURE: 125PSI WORKING TEMP: 40-150°F MAX TEMP: 180°F 100

DESIGNED TO CONTROL THE FLOW OF WATER IN FAUCETS, TOILETS, DISHWASHERS AND ICE MAKERS BRASS CONSTRUCTED BODY AND NUTS WITH PLASTIC STEM WORKING PRE...

1/2" FIP X 3/8" OD ANGLE STOP 96

• Lever handle• For use with liquefied petroleum, natural gas and air mixtures up to 175 PSI• Brass body• Flare x FIP

1/2 MALE BR BOILER DRAIN

LEAKPROOF PERFORMANCE WITH TEFLON SEATS WORKING PRESSURE: 125 PSI WORKING TEMP: 40° TO 140°F BRASS CONSTRUCTION WITH CHROME PLATED FINISH 24

COLOR-CODED FOR EASY IDENTIFICATION EQUIPPED WITH DIELECTRIC SLEEVES AND RUBBER WASHERS WORKING PRESSURE: 125 PSI INTERMITTENT IMPULSE PRESSURE: 18...

LEAKPROOF PERFORMANCE WITH TEFLON SEATS WORKING PRESSURE: 125 PSI WORKING TEMP: 40° TO 140°F BRASS CONSTRUCTION WITH CHROME PLATED FINISH 24

LEAKPROOF PERFORMANCE WITH TEFLON SEATS WORKING PRESSURE: 125 PSI WORKING TEMP: 40° TO 140°F BRASS CONSTRUCTION WITH CHROME PLATED FINISH 24

COMPATIBLE WITH MOST BRANDS INCLUDES: (2) 4,500-WATT, 240-VOLT SCREW IN WATER HEATER ELEMENTS, (1) THERM-O-DISC STYLE 240-VOLT LOWER THERMOSTAT, (1...

CENTER DRAIN WASHER OUTLET BOX F1807 PEX W/ HAMMER ARRESTORS

INLUDES ALL HARDWARE FOR INSTALLATION STAIN-RESISTANT SURFACE COMPATIBLE WITH MOST BRANDS OF ELONGATED TOILETS

HEAVY-DUTY BRASS NO-CAULK BRASS SHOWER DRAIN• 2"• Stainless steel grid• Includes locking wrench• Installs to pipe from above shower drain

CODE COMPLIANT HEIGHT OF 18" FROM THE GROUNDFOR USE IN IN WATER HEATERS UP TO 50 GAL. BUILT WITH HIGH-QUALITY GALVANIZED STEEL21" X 21" X 18" TALLM...

1-1/2" X 16" DIRECT CONNECT CENTER OUTLET WITH BAFFLE TEE TO KEEP WATER FROM ONE WASTE PIPE FROM ENTERING THE OTHER AT THE CONNECTION Tee Dimension...

DESIGNED TO FIT MOST BATHTUBS WHERE A TRADITIONAL SHOWER IS UNAVAILABLE CHROME FINISHED HIGH QUALITY BRASS CONTRUCTION 3-3/8" CENTER, 3/4" MIP CONN...

MEETS STATE AND CITY DESIGN GUIDELINES FOR BRACING WATER HEATERS GALVANIZED STEEL CONSTRUCTION 120" STRAP ADJUSTABLE FOR WATER HEATERS UP TO 80 GAL...

FORGED, ROUGH BRASS BODY WITH STUFFING BOX MAX PSI: 125 MAX TEMP: 160°F *NOT INTENDED FOR DRINKING WATER APPLICATIONS - FOR IRRIGATION PURPOSES ONLY

DESIGNED TO CONTROL THE FLOW OF WATER IN FAUCETS, TOILETS, DISHWASHERS AND ICE MAKERS BRASS BODY AND NUTS WITH PLASTIC STEMS WORKING PRESSURE: 125 ...

DESIGNED TO CONTROL THE FLOW OF WATER IN FAUCETS, TOILETS, DISHWASHERS AND ICE MAKERS BRASS CONSTRUCTED BODY AND NUTS WITH PLASTIC STEM WORKING PRE...

LEAD FREE BRASS CONSTRUCTION SCREWS ON EXISTING STRAIGHT OR ANGLE VALVE TO CONVERT TO DUAL OUTLET VALVE

ONE-PIECE BOX CONSTRUCTED FROM HIGH-IMPACT, NON-CORROSIVE PLASTIC RECESSED DESIGN ACCOMMODATES 1" DRYWALL EQUIPPED WITH 1/4 TURN BALL VALVES AND PR...

FOR USE WITH 1/2" COPPER PIPE INCLUDES HEX WRENCH ZINC BODY WITH BRUSHED NICKEL FINISH  50

FOR USE WITH 1/2" COPPER PIPE INCLUDES HEX WRENCH ZINC BODY WITH CHROME FINISH 

5-1/8" SPOUT  FITS 1/2" COPPER, 1/2" IPS OR 3/4" IPS DIE-CAST ZINC CONSTRUCITON  50

TUB SPOUT WITH FACE BUSHING• Brass construction• With 3/4" to 1/2" IPS reducing face bushing• Chrome• 4-7/8" Spout length 50

1/2 IPS CONNECTION 5-3/8" SPOUT 

5-1/8" SPOUT FITS 1/2" COPPER PIPE INCLUDES HEX WRENCH

15/16 FLX3/4FIP ANGLE GAS BALV Eastman 60029 3/4" Fip x 15/16" Angle Flare Gas Ball Valve